Vine Linuxでの実行例

11Mbpsの 無線LANカード（WLI-PCM-S11G）をノート型PCのVine Linux（バージョン2.0，カーネルはソースからコンパイルしたバージョン2.2.17）が認識し，アクセスポイント（ WLAR-L11G-L)からDHCPでIPアドレスの割り当てを受けるまでのログ（一部省略）を以下に示す．

     
    Apr 10 17:22:29 localhost pcmcia:  cardmgr.
    Apr 10 17:22:29 localhost rc: Starting pcmcia succeeded
    Apr 10 17:22:29 localhost cardmgr[430]: starting, version is 3.1.16
    Apr 10 17:22:29 localhost inet: inetd startup succeeded
    Apr 10 17:22:29 localhost cardmgr[430]: watching 2 sockets
    Apr 10 17:22:29 localhost kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
    Apr 10 17:22:29 localhost kernel: cs: IO port probe 0x0800-0x08ff: clean.
    Apr 10 17:22:29 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x480-0x48f 0x4d0-0x4d7
    Apr 10 17:22:29 localhost cardmgr[430]: initializing socket 1
    Apr 10 17:22:29 localhost kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
    Apr 10 17:22:29 localhost cardmgr[430]: socket 1: Bromax OEM 11Mbps 802.11b WLAN Card (Prism 3)
    Apr 10 17:22:30 localhost cardmgr[430]: executing: 'modprobe prism2_cs'
    Apr 10 17:22:30 localhost kernel: init_module: prism2_cs.o: 0.2.0 Loaded
    Apr 10 17:22:30 localhost kernel: init_module: dev_info is: prism2_cs
    Apr 10 17:22:30 localhost kernel: prism2_cs: index 0x01: Vcc 5.0, irq 9, io 0x0100-0x013f
    Apr 10 17:22:30 localhost cardmgr[430]: executing: './wlan-ng start wlan0'

    Apr 10 17:22:31 localhost kernel: Prism2 card SN: 99SA01000000
    Apr 10 17:22:31 localhost cardmgr[430]: + message=dot11req_mibset
    Apr 10 17:22:31 localhost cardmgr[430]: +   mibattribute=dot11WEPDefaultKeyID=0
    Apr 10 17:22:31 localhost cardmgr[430]: +   resultcode=success
    Apr 10 17:22:31 localhost cardmgr[430]: + message=dot11req_mibset
    Apr 10 17:22:32 localhost cardmgr[430]: +   mibattribute=dot11ExcludeUnencrypted=true
    Apr 10 17:22:32 localhost cardmgr[430]: +   resultcode=success
    Apr 10 17:22:32 localhost cardmgr[430]: + message=dot11req_mibset
    Apr 10 17:22:32 localhost cardmgr[430]: +   mibattribute=dot11PrivacyInvoked=true
    Apr 10 17:22:32 localhost cardmgr[430]: +   resultcode=success
    Apr 10 17:22:32 localhost cardmgr[430]: + message=dot11req_mibset
    Apr 10 17:22:32 localhost cardmgr[430]: +  mibattribute=dot11WEPDefaultKey0=xx:xx:xx:xx:xx
    Apr 10 17:22:32 localhost cardmgr[430]: +   resultcode=success

    Apr 10 17:22:33 localhost cardmgr[430]: + Determining IP information for wlan0... done.



Return 戻る